Introduction
Two-column pneumatic lift and press for pumps, suitable for grease and viscous media.
Description
With its 3-way control valve, it allows raising or lowering the pump and follower plate, facilitating the replacement of 180–220 kg (400 lbs) drums. It is especially recommended for application with greases and high viscosity materials (from 200 CPS to 500 ASTM).
The follower plate is pressed down by pressurized pneumatic cylinders, preventing interruptions in the grease flow caused by air pockets in the product bed. In addition, it allows the total collection of grease from the internal walls to the bottom of the drum, with the pump suction being assisted.
Specifications
Minimum Height
1802mm
Maximum Height
2802mm
Flow Rate
12kg/min
Maximum Operating Pressure
8bar
Capacity
180 – 220 kg drum
Rubber Hose
1.5 meters
Viscosity
200 – 500 ASTM (at 25°C)
Pressing Force
4bar – 450kg / 6bar – 650kg / 8bar 870kg
Code
1012607
